Access Point AP8132
The AP 8132 goes beyond typical AP functionality and features. In addition to providing high-speed network access for customers and staff, its modular design also enables you to more efficiently deploy applications where they are most needed. By leveraging your wireless network, the AP 8132 lets you deploy these applications without the time, effort and cost of having to install additional hardware and cabling.
3-spatial stream 3X3 MIMO access point
Delivers maximum throughput to support virtually any enterprise application, including voice and HD video
802.11n operation with standard 802.3af
Simplifies and reduces total cost of installation using standard Power-over-Ethernet (PoE).
Standard USB interface for module attachments
Allows for virtually unlimited possibilities for applications with its innovative design that accepts up to two module attachments, one on either side of the base.
Load balancing, pre-emptive roaming and rate scaling
Increases reliability and resilience of the wireless network to support mission critical applications.
Band-unlocked dual band design
Lets you increase security without increasing costs. Band-unlocked radios enable 24x7 dual band Wireless IPS sensing on both 2.4 GHz and 5 GHz with concurrent 802.11a/b/g/n client access and mesh.
Antenna Specifications
Connector type
RPSMA
External antenna support
Yes
Physical characteristics
Dimensions (HxWxD)
9.0 in L x 6.0 in W x 1.625 in H / 22.9 cm L x 15.2 cm W x 4.1 cm H
Housing
Metal, Plenum-rated housing
Plenum rated
Yes
Physical interfaces
2 ports (GE1, GE2) Auto-sensing 10/100/1000Base-T Ethernet; 802.3at on GE1 LAN port 6 RP-SMAs antenna connectors RJ45 console port
Weight
3.2 lbs/1.45 kg
Available mount configurations
Above drop ceiling, underceiling or on wall; no additional hardware required to mount
LEDs
Activity indication: 2 top-mounted LEDs, 2 bottom-mounted LEDs
Power specifications
Operating voltage
36-57VDC
Integrated power over Ethernet support
802.3af support for dual radio, 802.3at draft power injector
Operating current
270mA @48V in 802.3af mode, 438mA @48V in 802.3at mode, typical.
Radio specifications and networking
Layer 2 and Layer 3
Layer 3 routing, 802.1q, DynDNS, DHCP server/client, BOOTP client, PPPoE, and LLDP
QoS
WMM, WMM-UAPSD, 802.1p, Diffserv and TOS
Uplink
2 ports (GE1, GE2) Auto-sensing 10/100/1000Base-T Ethernet; 802.3at on GE1 LAN port
Available transmit power settings
Adjustment: 1dB increment from 0dB to max
Data rates supported
802.11b/g: 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, and 54Mbps 802.11a: 6, 9, 12, 18, 24, 36, 48, and 54Mbps 802.11n: MCS 0-23 up to 450Mbps
Security
Stateful Firewall, IP filtering, NAT, 802.1x, 802.11i, WPA2, WPA Triple-Methodology Rogue Detection: 24x7 dual-band WIPS sensing, MU-assisted, on-board IDS and secure guest access (Hotspot)
Wireless medium
Direct Sequence Spread Spectrum (DSSS), Orthogonal Frequency Division Multiplexing (OFDM) and Spatial multiplexing (MIMO)
Frequency
2412 to 2472 MHz, 5180 to 5825 MHz
Network standards
IEEE 802.11a/b/g/n, 802.11d and 802.11i WPA2, WMM and WMM-UAPSD
Operating channels
2.4GHz band: channel 1 through channel 13 ; 5.2GHz band: channel 36 through channel 165. (* channel availability depends on local regulatory restriction).
Regulatory specifications
Electrical safety
UL 60950-1, EN 60950-1, IEC 60950-1, UL2043, cUL
Environmental
RoHS Directive 2002/95/EEC
Radio approval
FCC (USA), Industry Canada, CE (Europe), China, Australia
User environment
Operating temperature
32°F to 122°F/0°C to 50°C
Electrostatic discharge
15kV air, 8kV contact
Operating humidity
5 to 95% RH non-condensing
